|
·
|
Stainless steel unique Front Runner grab-on foot
|
|
·
|
Low profile design
|
|
·
|
Easily removed and fitted
|
|
·
|
Suitable for vehicles with factory fitted rails
|
|
|
|
|
|
FITTING INSTRUCTIONS FOR ROOF RACKS AND LOAD BARS THAT UTILISES THE GRAB ON FOOT FOR VEHICLES THAT HAVE FACTORY FITTED RAILS
 |
|
 |
| Figure 1. |
|
Figure 2.
|
| · |
Mount grab on foot onto slat as shown in figure 1. |
| · |
Leave the two 8mm nutss |
| · |
Once the rack / load bar is placed on the factory fitted rail, push portion B till contact is made with factory rail. |
| · |
Turn screw C by hand in until contact is made with B. |
| · |
Tighten screw C firmly and then tighten the two 8mm nuts |
| · |
Give screw C a further turn and fully tighten the two 8mm nuts. |
|
NB: The spacers that are provided are to be used to level the roof rack or load bars .
To determine length of the load bar please use this guide:
|
Roof Rack (L x W )
|
Suitable for the following vehicles
|
|
1.2M x 1165
|
Jeep Liberty, Grand Cherokee 2007>, Prado, Pajero, Fortuner
|
|
1.4M x 1165
|
Jeeps, Pajero, Prado, Fortuner
|
|
1.4M x 1225
|
Land Cruiser 100
|
|
1.8M x 1225
|
Prado, Fortuner, Pajero CK LWB
|
|
1.8M x 1345
|
Land Cruiser 100
|
|
2M x 1225
|
Land Cruiser, Pajero CK LWB
|
|
Load bars (L)
|
Suitable for the following vehicles
|
|
1200
|
Jeep, Prado, Pajero, Fortuner
|
|
1250
|
Land Cruiser,
|
|
1320
|
Any application that requires longer length load bar
|
| Please note that the grab on roof rack is designed to carry light weight items such as: |
| Roof top tents |
Chairs |
| Transit bags |
Tables |
| Big bulky – light weight items |
Spare wheel brackets
(on the roof rack only – not load bars) |
| Under no circumstances should the following be fitted to a grab on system: |
| Jerry cans |
Water containers |
| Heavy point load items |
|
Please note: The grab on system will not work on vehicles fitted with standard factory fitted rails with a smaller diameter such as: BMW X5, Merc ML and the Korrando etc.
|
